DEDEKS® BOVI-DEKS™ NAIL BLOCK ADHESIVE
BOVI-DEKS, designed for bonding wooden or urethane blocks to cattle claws, It is a fast-curing two-component polyurethane-based adhesive. The product has a cure time of 20 to 30 seconds (at 20°C).
Intended Use:
Bovi- For the treatment of cattle hoof diseases Based on the principle of reducing the pressure on the diseased nail, designed to accelerate the healing process.
Used to glue wood or urethane blocks to hard nails.
Nail preparation and block application:
Release parts of the nail after mechanical maintenance and cleaning of the nail, dirt and dust are removed. Wet and wet nails are dried. This is important to ensure full adhesion. In addition, the rough surface will contribute to the longevity of the block.
The glue is applied to the block in a 15 cm strip 3-5 mm thick is quickly glued to the nail and lightly pressed for 20-25 seconds.
After 2-3 minutes of complete hardening , you can allow your pet to step on the nail.
Do not cover wet, bleeding or infected areas.
Cartridge preparation:
Cartridges containing 2 components based on resin and polyurethane have different components in each compartment. The clip on the end is opened, the green sealing plug is removed and the Dedeks Adhesive Mixer tip is inserted. It is secured by passing through the clamp again.
The Dedeks adhesive is placed in the application gun and prepared for use. The tip is held at a 45 degree angle to air and bubbles and the components are mixed in the correct proportion. This is important for proper curing.
Applied to wood or urethane block. Mixer may remain in cartridgeafter application. The agitator tip is intended for single use only. The agitator tip must be replaced each time it is used again.